What’s the Process of Resurfacing Concrete?
Resurfacing concrete is a process of restoring the look and texture of an old, worn-out slab. It is usually accomplished by applying a thin layer of fresh concrete over the existing surface. The aim is to create a smooth, even finish that will last for many years. Here are seven detailed steps to help you understand the resurfacing process:
1. Prepare the Area
The first step is to thoroughly clean and prepare the area before resurfacing. This includes removing any dirt, debris, or existing sealants from the surface. You should also clear away any vegetation and weeds surrounding the slab since they can cause problems during the resurfacing process.
2. Repair Any Cracks and Holes
Once the area has been cleared, it is important to repair any cracks or holes in the existing surface. This can be done by filling them with a concrete patching compound and smoothing it out with a trowel. Once dry, the patch should be sanded down until it is level with the rest of the slab.
3. Apply a Bonding Agent
Before any resurfacing can happen, it is important to apply a bonding agent to the existing surface. This will help create a strong bond between the old and new layers of concrete. Make sure to follow the instructions on the bonding agent’s packaging when applying it to the surface.
4. Pour the Resurfacing Mix
Once the bonding agent has been applied, you can pour the resurfacing mix onto the area. It is important to ensure that it is spread evenly and smoothly over the entire surface, using a trowel or wooden float. Make sure to also use a straight edge to check if it is level.
5. Allow to Dry and Set
Once the resurfacing mix has been spread, it is important to allow it to dry and set before continuing with the next steps. This usually takes a few hours depending on the weather conditions. Make sure not to walk or drive over the area until it is completely dry and set in place.
6. Apply Sealant
After the resurfacing mix has dried and set in place, you can apply a sealant to help protect it from further wear and tear. Make sure to follow the instructions on the sealant’s packaging when applying it over the slab. This will help ensure that your resurfaced concrete lasts for many years.
7. Clean Up
Once the sealant has been applied, it is time to clean up the area. Remove any tools and materials that you used during the process, such as trowels and floats. You should also sweep away any debris or remaining bits of concrete from the surface before enjoying your newly resurfaced concrete!
Resurfacing your concrete can be an unwanted task, but by following these seven easy steps, you can easily and effectively resurface concrete in your home or business. The process may take a little bit of time but with a little bit of patience and effort, you’ll be able to achieve a beautiful, long-lasting finish that will look great for many years to come. Good luck!